FLOOR FINISHES

Resine per pavimenti industriali

RIVEFONDO W BIANCO

Water-based epoxy base coat with an extremely high covering power.

Water-based epoxy base coat with an extremely high covering power. A white water-based bi-component epoxy product with an extremely high covering power used as a base coat in combination with top coats featuring colours with a poor coverage. The product is made up of:

  • component A: a mixture of liquid epoxy pre-polymers and additives;
  • component B: co-polymerisation amines, additives and special high-coverage fillers.

RIVEPUR

A bi-component polyurethane top coat. CE marking, EN 13813-B2.0- AR0.5- IR4

RIVEPUR is a water-based product consisting of two liquid components:

• component A: a mixture of functionalised emulsified pre-polymers, additives and fillers; • component B: hydrophilic pre-polyisocyanate.

The product is a coating that does not undergo substantial colour alterations. The product is available in the neutral (“colourable”) version, which can be coloured with the relevant water-based colouring pastes of the COLOUR MIXING SYSTEM. When applied and cured according to the indications shown in the “Characteristics” table, RIVEPUR can be used as a coating in environments containing foodstuffs (Test report no. 342563, as per the UNI 11021 standard, issued by ISTITUTO GIORDANO).

CONSUMPTION: Average consumption per coat (with a roller): 100–110 g/m2.

ATTENZIONE! Aggiungere il pigmento al componente A colorabile. Vedi etichetta del prodotto.

RIVEPOX

Water-based colored epoxy coating.

RIVEPOX is a bi-component water-based product consisting of:

• component A: a mixture of liquid epoxy pre-polymers and additives; • component B: co-polymerisation amine, pigments, additives and water.

RIVEPOX is used to create coatings for industrial concrete surfaces finished with quartz: in particular, it is recommended for the stain-proofing and dust-proofing of warehouses, depots, garages, etc. The product is a coating that does not suffer any substantial colour alteration over time. The product is available in the neutral (“colourable”) version, which can be coloured with the relevant water-based colouring pastes of the COLOUR MIXING SYSTEM.

CONSUMPTION: We recommend creating a coating 0.15–0.20 mm-thick by applying 0.25 to 0.30 kg/m2 of product (A+B), depending on the support’s absorbency.

ATTENZIONE! Aggiungere il pigmento al componente B colorabile. Vedi etichetta del prodotto.

FINISH PUR SUPERMAT

Rapid-drying water-based ultra-matt colorable bi-component polyurethane finish

A non-yellowing and rapid-drying water-based bi-component polyurethane enamel with matt finish. FINISH PUR SUPERMAT can be coloured with the relevant water-based colouring pastes of the COLOUR MIXING SYSTEM. When applied to the most diverse building surfaces, FINISH PUR SUPERMAT creates a coating that withstands weathering and abrasion just 4–5 hours after its application (at +23°C with 50% R.H.). The product can be admixed (only in the top coat) with a special liquid component – ADDITIVO PUR SUPERMAT EXTRA – with anti-dirt effect, to be incorporated directly into the A+B mixture.

CONSUMPTION: 0.08–0.11 kg/m2 per coat applied with a roller.