FOR DAMP SUPPORTS
BARRIER EP 117
– Component A: a mixture of water-based epoxy pre-polymers, fillers, and additives; – Component B: co-polymerisation modified amine; – BARRIER EP 117 FAST: reaction accelerant; – QUARTZ SAND: 0.1-0.6: aggregate, to be sprinkled; – EXTRUDER for extracting the product from the bags.
The product is supplied as a KIT contained in a polypropylene bucket which can be used both as a handy shipping and storage unit and as a work container. Mixing the two components A and B together (with a mechanical mixer) yields a fluid, dense mix, intended specifically for application with a roller on various types of building surfaces.
- roughly 300 g/m2 (A+B)
- 0.8 kg/m2 of QUARTZ SAND 0.1-0.6 for sprinkling
- 120 g of BARRIER EP 117 FAST for 1 kg of BARRIER EP 117 (A+B)
EP 117 TRICOMPONENTE
CE MARKING EN 13813 (SR – B2.0)
EP 117 TRICOMPONENTE is a product made up of: – Component A: an aqueous dispersion of liquid epoxy pre-polymers, pigments, additives and special fillers; – Component B: an aqueous dispersion of co-polymerisation amines and additives; – Component C: cement powder. The product is specially designed to obtain skim coats with an extremely high gripping power (especially on damp and tiled supports) and capable of withstanding conditions of negative thrust dampness.
For repairing irregular supports
DEKORA CRETE 2K
DEKORA CRETE 2K is formulated with two components (liquid and powder) to be mixed at the time of application, made up of quartz sand, cements, additives and resins. Once the components have been mixed, they create a very soft and creamy mixture that is specially designed for skim coating surfaces to be subsequently treated with the DEKORA micro-cement cycle or resins.
CONSUMPTION: 1.5 kg/m2 for a 1 mm thickness.
PLASTO CRETE is a fibre-reinforced anti-shrinkage skim coat that is highly flexible even during the hardening phase, and is specially designed for skim coating, repairs, filling and reconstruction of missing parts.
CONSUMPTION: roughly 1.6 kg/m2 per mm of thickness.
A spreadable open-pore epoxy mortar with “damp ground” consistency. The product is made of an epoxy primer and natural quartz mixture in a 1:8 ratio
CONSUMPTION: roughly 20 kg of MASSETTO EPOSSIDICO per cm of thickness per m2.
IMPREGNATING AGENT FOR SCREEDS AND PLASTERS
CONSOLIDANTE EP 117
CE MARKING EN 1504-2 (C) MC-IR PRINCIPLES
CONSOLIDANTE EP 117 is a bi-component product made up of:
- – Component A: a mixture of liquid epoxy pre-polymers, additives and emulsifiers;
- – Component B: co-polymerisation amine, additives and emulsifiers.
The product has a high capacity to penetrate even damp substrates and, once polymerised, provides excellent consolidation and creates an effective dust- and oil-proof surface film.
CONSUMPTION: 1 kg of suitably diluted product can be used to treat a 40 m2 surface.
Repairing of cracks and joints
A lightweight bi-component filler for filling and rigidly sealing any building surface. Designed for anchoring steel bars when repairing structural and mobile cracks on sand and cement screeds and on concrete.
CONSUMPTION: As a filler: 1.46–1.54 kg/lm for filling and skim coating to a thickness of 1 mm: 1.5 kg/m2.
MS PRO SEALER
“MS PRO SEALER is a single-component sealant with neutral reaction formulated with MS Polymer, free of solvents and isocyanates, with a low modulus of elasticity, rapid cross-linking, high elasticity and excellent adhesion on several supports without the use of primers. It can be coated over, which makes it specially suited to grouting and making elastic fillets to be covered. MS PRO SEALER complies with the EN 15651-1 standard, “”Sealants for facade elements””, with F-EXT-INT-CC performances.”